Water Treatment Systems | Water Treatment System | Best Water Purification System | supplier Distributors-watertreatmentsystems.org Water Treatment Systems and Water Treatment System supplier also Distributors-over 5,580 ,Best Water Purification System,Home Water Purification Systems,Home Water Treatment Systems buyers around the world at watertreatmentsystems.org http://www.watertreatmentsystems.org/ Wed, 20 Sep 2017 08:29:01 -0600 Titanium Trioxide <img src='productpic/ps_6ihc1456477134.jpg' /><br>Substanc: Titanium Trioxide<br /> Formula: Ti3O5<br /> Product Form: 0.5~4mm granules<br /> Refractive Index(nd): 2.35/500nm<br /> Transmission Range: 400~2000nm<br /> Evaporation Temperature: 2400~2450℃<br /> Typical Source: E<br /> Appliaction: Optical Coating is mainly employed of surface of optical components including lenses, prisms, windows as well as various light wedges and beam split mirrors and so on. Ti3O5 can produce no splash optiacl thin film on the high surface quality optics which means is can lead a very high optical surface quality under the standard and correct procedurse.<br /> E: elector beam gum<br /> http://www.watertreatmentsystems.org/titanium-trioxide.html Titanium Trioxide http://www.watertreatmentsystems.org/productpic/ps_6ihc1456477134.jpg http://www.watertreatmentsystems.org/titanium-trioxide.html Magnesium Fluoride <img src='productpic/ps_1qa61456477233.jpg' /><br>Substanc: Magnesium Fluoride<br /> Formula: MgF2<br /> Product Form: Granules 1~2.5mm<br /> Refractive Index(nd): 1.38/220nm<br /> Transmission Range: 153~7000nm<br /> Evaporation Temperature: 1300~1600℃<br /> Typical Source: W, Mo, Ta, E<br /> Appliaction: Mangesium Fluoride is well known as a kind of most common coation materials with low refractive index. It can be used in ARC multilayers, beam splitting, light absorping, and polarizing, protective coatings from the UV to NIR region of spectrum.<br /> W: tungsten; Mo: molybdenum; Ta: tantalum; E: elector beam gum<br /> http://www.watertreatmentsystems.org/magnesium-fluoride.html Magnesium Fluoride http://www.watertreatmentsystems.org/productpic/ps_1qa61456477233.jpg http://www.watertreatmentsystems.org/magnesium-fluoride.html Tantalum Oxide <img src='productpic/ps_xad31456477290.jpg' /><br>Substanc: Tantalum Oxide<br /> Formula: Ta2O5<br /> Product Form: 1gram tablets<br /> Refractive Index(nd): 2.3/500nm<br /> Transmission Range: 400~7000nm<br /> Evaporation Temperature: 1700~2000℃<br /> Typical Source: E<br /> Appliaction: Tantalum Pentoxide is an excellent high-index materical suitable for coatings in the near-UV to IR regions with very little absorption. During the past few years. Ta2O5 coation materials experienced great successful application in DWDM coatings which was used in combination with silicon dioxide layers.<br /> E: elector beam gum<br /> http://www.watertreatmentsystems.org/tantalum-oxide.html Tantalum Oxide http://www.watertreatmentsystems.org/productpic/ps_xad31456477290.jpg http://www.watertreatmentsystems.org/tantalum-oxide.html Silicon Dioxide <img src='productpic/ps_ac31456477334.jpg' /><br>Substanc: Silicon Dioxide<br /> Formula: SiO2<br /> Product Form: Granules Ring<br /> Refractive Index(nd): 1.46/500nm<br /> Transmission Range: 200~2500nm<br /> Evaporation Temperature: 1600~2200℃<br /> Typical Source: E<br /> Appliaction: Silicon Dioxide, a kind of low index material, is used more widely than and other crystalline compound. Many excellent properies of SiO2 film have been noted, such as its transparency in visible and ultraviolet light, good property high hardness of film and excellent environmental stability, and so on. SiO2 can be used in multi-layer coatings for laser mirrors, anti-reflection coatings, filters, bean splitters, and thin-film capacitors.<br /> E: elector beam gum<br /> http://www.watertreatmentsystems.org/silicon-dioxide.html Silicon Dioxide http://www.watertreatmentsystems.org/productpic/ps_ac31456477334.jpg http://www.watertreatmentsystems.org/silicon-dioxide.html Indium Tin Oxide <img src='productpic/ps_6rqa1456477374.jpg' /><br>Substanc: Indium Tin Oxide<br /> Formula: ITO<br /> Product Form: Tablets<br /> Refractive Index(nd): 1.85/500nm<br /> Transmission Range: 400~1500nm<br /> Evaporation Temperature: ~1450℃<br /> Typical Source: E<br /> Appliaction: Indium Tin Oxide can be used as transparent conductive films, antistatic films and solar coatings.<br /> E: elector beam gum http://www.watertreatmentsystems.org/indium-tin-oxide.html Indium Tin Oxide http://www.watertreatmentsystems.org/productpic/ps_6rqa1456477374.jpg http://www.watertreatmentsystems.org/indium-tin-oxide.html Aluminum Oxide <img src='productpic/ps_5dk01456477420.jpg' /><br>Substanc: Aluminum Oxide<br /> Formula: Al2O3<br /> Product Form: Granules 2.5~5mm<br /> Refractive Index(nd): 1.64/550nm<br /> Transmission Range: 200~500nm<br /> Evaporation Temperature: 2000~2200℃<br /> Typical Source: E<br /> Appliaction: Aluminum Oxide is a kind of medium-index mateial which is suitable for applications in UV through IR spectrum. It can be used in antireflection coatings, dielectric mirror, multi-layer filter, interference cotings protective coatings, etc.<br /> E: elector beam gum<br /> http://www.watertreatmentsystems.org/aluminum-oxide.html Aluminum Oxide http://www.watertreatmentsystems.org/productpic/ps_5dk01456477420.jpg http://www.watertreatmentsystems.org/aluminum-oxide.html Crystal Coating <img src='productpic/ps_s11457494893.jpg' /><br>Product name: DIY double crystal coating(Easy edition)<br /> Product lngredinents: UV hardening resin<br /> Product content: crystal coating 60ml<br /> Crystal coating product features:<br /> Hydrophilic coating type. Hydrophilic: is the high affinity property of the interaction between water. The principle is that in the affinity of the coating, the water will because of surface tension without the formation of droplets, but the formation of film and expansion. When the water has a pool of water in the metal surface, because the physical relationship between the use of water will pull away dirt.<br /> <div align="center"> <img src="images/detail/qingsong-2.jpg" /><br /> </div> <br /> Crystal coating Product Benefits:<br /> 1. Protect the paint: Enhanced surface' adhesion degree and film' density<br /> 1.1. Glass fiber resin: reduce the physical deterioration of the collision.(rain, snow, dust, fine sand, etc.)<br /> 1.2. UV hardening resin: to prevent ultraviolet and other chemical degradation.<br /> 2. Antifouling: can inhibit the dirt, not the electrostatic adsorption of dust, easy to clean.<br /> 3. Surface become double glossy: special formula to make UV resin will not let the body color becomes dark, it become more shiny.<br /> 4. Acid and alkali resistance product: a double layered structure, with strong acid and strong alkali resistance glass fiber resin UV resin hardening.PH range between PH3~PH11.<br /> 5. A suitable for all cars: This product low stimulation and no contain abrasive, can be used on car'paint such as adding the metal powder or mica.<br /> 6. The coating process is simple: only use wet / dry cloth wipe evenly.<br /> 7. Reduce accidents happend: during rainy days, raindrop will rapid formation of small water flow both side of window, to prevent poor visibility.<br /> 8. Reduce the number of washing car : hydrophilic properties, rain can take away car dirt and water residue on the surface, which can reduce the number of car wash. Enhanded oil pollution resistant ability, less water mark.<br /> 9. Can reduce the dirt in the car: If liquid spilled, it can quickly easy clean up.<br /> 10. 2 in 1, wide applicability: can apply same product on car'body and window. In addition also apply on leather material.<br /> 11. Can be recoating, enhanced protection: After the first coating, can be repeated within four years. http://www.watertreatmentsystems.org/crystal-coating.html Crystal Coating http://www.watertreatmentsystems.org/productpic/ps_s11457494893.jpg http://www.watertreatmentsystems.org/crystal-coating.html Car Crystal Coating <img src='productpic/ps_xiab1457495055.jpg' /><br>Product name: DIY double crystal coating(Advanced)<br /> Product lngredinents: UV hardening resin<br /> Product content: crystal coating 60ml and Deep cleaning detergent 100ml<br /> Crystal coating product features:<br /> hydrophilic coating type. Hydrophilic: is the high affinity property of the interaction between water. The principle is that in the affinity of the coating, the water will because of surface tension without the formation of droplets, but the formation of film and expansion. When the water has a pool of water in the metal surface, because the physical relationship between the use of water will pull away dirt.<br /> <div align="center"> <img src="images/detail/daren-2.jpg" /><br /> </div> <br /> Crystal coating Product Benefits:<br /> <ol> <li> Fiber glass resins and UV-curable resin have special ingredients, it&nbsp; can&nbsp; prevent ultraviolet degradation chemistry &amp; reduce physical deterioration cause by collision due to rain, snow, dust, sand etc. Enhance the adhesion of the product and protect car body. </li> <li> After coating, it does not generate static electricity to attract dust, easy to clean. </li> <li> UV curable resin have special composition that can make car 'color become double glossy. </li> <li> Fiber galss resin with strong acid resistance and UV curable resin with strong alkali. This characteristic present PH range between PH3~PH11. </li> <li> Applicable for all type vehicles, this products is low irritant and non-abrasive. </li> <li> The process is simple just use a wet and a dry cloth to wipe evenly. </li> <li> After coating, rainwater will quickly form a small flow on both sides of window it can avoid poor visibility and dangerous when raining. </li> <li> When raining, rainwater can bring away dirty from surface and not left over stain on the surface,it look like after washing the car. </li> <li> It also can used on interior of car, so that easily to clean. </li> <li> The application is wide, can use for car' body, window and interior part which is impermeable material. </li> <li> After the first coating, can be repeated within four years. </li> </ol> <br /> Deep cleaning detergent Instrustion:<br /> Before coating, use deep cleaning detergent wash car again, so that can remove oil from surface of the car<br /> <br /> Deep Cleaner' Advantages:<br /> Deep cleaning detergent has been clean up grease from car surface, therfore the coating perform will become more better tightly on surface.<br /> http://www.watertreatmentsystems.org/car-crystal-coating.html Car Crystal Coating http://www.watertreatmentsystems.org/productpic/ps_xiab1457495055.jpg http://www.watertreatmentsystems.org/car-crystal-coating.html Deep Crystal Coating <img src='productpic/ps_wwfa1457495336.jpg' /><br>Product name: DIY double crystal coating(Professional)<br /> Product lngredinents: UV hardening resin<br /> Product content: crystal coating 60ml and Deep cleaning detergent 100ml and Protecting liquid 60ml<br /> Crystal coating product features:<br /> As a kind of hydrophilic coating. Hydrophilic: is the high affinity property of the interaction between water. The principle is that in the affinity of the coating, the water will because of surface tension without the formation of droplets, but the formation of film and expansion. When the water has a pool of water in the metal surface, because the physical relationship between the use of water will pull away dirt.<br /> <div align="center"> <img src="images/detail/zhuanye-2.jpg" /><br /> </div> <br /> Crystal coating Product Benefits:<br /> <ol> <li> Protect car'paint: fiber glass resin can reduce physical deterioration cause by collision (rain, snow, dust, sand, etc.), and the UV curable resin can prevent UV and others chemical deterioration. </li> <li> Antifouling: Because does not generate static electricity to attract dust, it is easy to clean. </li> <li> Surface become double glossy: UV curable resin have special composition that can make car 'color become double glossy. </li> <li> Acid and alkali resistance product: a double layered structure, fiber glass resin (acid resistance) and UV-curable resin (alkali resistance). This two characteristics present PH&nbsp; between PH3~PH11. </li> <li> A suitable for all cars: This product low stimulation and no contain abrasive, can be used on car'paint such as adding the metal powder or mica. </li> <li> The coating process is simple: only use wet / dry cloth wipe evenly. </li> <li> Reduce accidents happend: When rain, rainwater will quickly form a small water line to both side of window without causing poor visibility. </li> <li> Reduce number of washing car: hydrophilic chatateristics, rain can take away dirty from surface. Surface will become anti-oil pollution &amp; less water mark. </li> <li> Can reduce dirt in car: this product have easy clean features, so that after coating, dirt can quickly to clean up effortless. </li> <li> Wide applicability: Car 'body, window and interior (impermeable material) can be applied. </li> <li> Can be recoating, enhanced protection : After the first coating, can be repeated within four years. </li> </ol> <br /> Deep cleaning detergent Instrustion:<br /> Before coating, use deep cleaning detergent wash car again, so that can remove oil from surface of the car.<br /> Deep Cleaner Advantages:<br /> Deep cleaning detergent has been clean up grease from car surface, therfore the coating perform will become more better tightly on surface.<br /> <br /> Protecting liquidinstruction:<br /> * After 3 months of coating, starta routine treatment.<br /> Instruction: First clean the car, spray amount of protecting liquid, with a wet cloth wipe evenly then use another dry cloth to wipe clean.<br /> <br /> Protecting liquid' Advantages:<br /> * As a regular maintenance gloss: keep car always glossy.<br /> * coating process is simple: just one step, can be completed.<br /> * Timeliness: water repellent effect of up to two months.<br /> * Forming a protective film on the plated crystal coating, can extended the coating'effect.<br /> http://www.watertreatmentsystems.org/deep-crystal-coating.html Deep Crystal Coating http://www.watertreatmentsystems.org/productpic/ps_wwfa1457495336.jpg http://www.watertreatmentsystems.org/deep-crystal-coating.html Hydrophilic Spray Coating <img src='productpic/ps_cwfg1457495562.jpg' /><br>Product name: 360 coating solution<br /> Product lngredients: Glass fiber reinforced polymer<br /> Product content: 360 coating solution 300ml<br /> Product features:<br /> * Super-simple process of car coating<br /> 360 coating liquid, contain non complete cured special ingredients. Even wiping uneven, does not cause uneven color on car, without professional practices, you can complete the coating.<br /> <br /> * Short process time<br /> After washing the car, spary coating liquid 360. <br /> As long as the "spraying, wiping, even ending" can quickly make the coating completed.Liquid coating 360 is hydrophilic, as will be readily water-soluble substance, into the cell structure of the dispersion, can be dissolved in water, even water droplets on the surface, can spray the coating solution.<br /> <br /> * Widely application<br /> 360 coating solution can be used for car body&amp;window, there have water repellent effect. If apply on rubber bumper or the like parts, it can enhance protection, anti-fouling effect.<br /> <br /> * High CP value<br /> 360 coating liquid is large packing, the amount of coating one car is around 25-30ml, therefore on big bottle can use for many car. It is affordable.<br /> <br /> * Characteristics of Glass Coat<br /> Glass fiber polymer (fiber glass) as the main component of the coating liquid. Not easy contaminant dust, static, high glossy product. http://www.watertreatmentsystems.org/hydrophilic-spray-coating.html Hydrophilic Spray Coating http://www.watertreatmentsystems.org/productpic/ps_cwfg1457495562.jpg http://www.watertreatmentsystems.org/hydrophilic-spray-coating.html Car Coating <img src='productpic/ps_isas1457495653.jpg' /><br>Product name: EZ convenietn coating<br /> Product lngredients: Glass fiber reinforced polymer, pure water<br /> Product content: EZ convenietn coating wipes one piece<br /> Product features:<br /> <ol> <li> Use of non crystalline Gel Amorphous (non crystalline gel) of the super high ductility structure, will not produce uneven color problems. </li> <li> Use of special scattered micro cell structure, will not be completely cured of special ingredients, do not need professional and complicated processes, uniform coating, simple and convenient, easy to clean, you can complete the coating. </li> </ol> <br /> Use range: Car body, wheel-rim, window, exhaust pipes, o-ring, plastic interior, bumper.<br /> http://www.watertreatmentsystems.org/car-coating.html Car Coating http://www.watertreatmentsystems.org/productpic/ps_isas1457495653.jpg http://www.watertreatmentsystems.org/car-coating.html Car Paint Coating <img src='productpic/ps_1y71457496172.jpg' /><br>Product name: 2 in One Water Stream Crystal Coating<br /> Product content: Crystal Coating 60ml and 397 anti-fungal expert Multi Type 100ml<br /> <br /> Crystal coating product features:<br /> As a kind of hydrophilic coating. Hydrophilic: is the high affinity property of the interaction between water. The principle is that in the affinity of the coating, the water will because of surface tension without the formation of droplets, but the formation of film and expansion. When the water has a pool of water in the metal surface, because the physical relationship between the use of water will pull away dirt.<br /> <div align="center"> <img src="images/detail/2%20in%20One%201-2.jpg" /><br /> </div> <br /> <br /> *Crystal coating Product Benefits:<br /> <ol> <li> Crystal coating can increase film' density by increase the adhesion of products. The main ingredients of the glass fiber resin &amp; UV-curable resin, can reduce the deterioration of physical touch and to prevent ultraviolet light generated by chemical degradation. </li> <li> Inhibit dirt, no dust electrostatic adsorption. </li> <li> After coating, it can make the car'body become doubled glossy, because of the special formula for UV-curable resin so that the car color does not darken. </li> <li> Glass fiber resin &amp; UV-curable resin have 2 type of composition. Have characteristics of anti acid and alkali. PH range between PH3~PH11. </li> <li> Non-abrasive, do not damage the paint, suitable for all cars. </li> <li> When coating, First apply coating liquid with a wet cloth wipe uniform, after that by using a dry cloth wipe according. It was simple process. </li> <li> After coating, the film already become hydrophilic. During rainy, raindrop will rapid formation of small water flow to both side of window can retain a good eyesight, reduce accident. It also ruduce number of washing car, rain can take away dirty from surface. </li> <li> 2 in 1 product, wide applicability. You can apply same product on car'body and window. Apply in the car' interior, it can easily reach the cleaning result. </li> <li> Can reduce dirt in car: this product have easy clean features, so that after coating, dirt can quickly to clean up effortless. </li> <li> After coating, can be repeated the process within four years. </li> </ol> <br /> * 397 anti-fungal expert Multi Type:397 anti-fungal expert Multi Type:<br /> Product features:<br /> 1. The effect to prevent variety of mold in the world, up to 397 kinds of mold. <br /> <div align="center"> <img src="images/detail/2%20in%20One%201-3.jpg" /><br /> </div> <br /> 2. With special prescription structure, not only can play as agent performance, but also allow more complex agent efficacy doubles, organic fungicide containing a unique, long-term inhibit fungal reproduction.<br /> 3. Ultra-high security, the human body without harm:<br /> <ul> <li> Oral toxicity test, "397 anti-fungal expert" less bodily harm&nbsp; than caffeine. </li> <li> Green products, non environmental pollution,it does not contain hormones, dioxin, a chemical control law (PRTR) in the specification 916 kinds of harmful substances. </li> <li> The presence of 57 kinds of general home fungus (cancer, allergies, fungal disease causes illness), "397 anti-fungal expert" can effectively inhibit, to prevent ill effect." </li> </ul> <br /> Use range:<br /> Leather, carpets, clothing, curtains, purses, cloth, etc. permeable material.<br /> http://www.watertreatmentsystems.org/car-paint-coating.html Car Paint Coating http://www.watertreatmentsystems.org/productpic/ps_1y71457496172.jpg http://www.watertreatmentsystems.org/car-paint-coating.html Lotus Coating <img src='productpic/ps_f0d21457502834.jpg' /><br>Product name: 2 in One Super Lotus Coating<br /> Product content: Super Lotus Coating 60ml and 397 anti-fungal expert Multi Type 100ml<br /> <br /> * Super Lotus Coating' product features:<br /> <ol> <li> &nbsp;High performance of durable water repellent, safe and low environmental impact. </li> <li> Formulated with a high concentration of pure 3D Glass 'backbone structure liquid resin. </li> <li> Combined with strong backbone of 3D Glass molecular structure can form a tough coating layer. </li> <li> Dust or dirt buildup is not easy, easy to clean and shiny and water repellent effect sustainable. </li> <li> Aqueous emulsion, will not impact to painting surface, body and environment. </li> <li> No need to wipe water-drops after the washing car, you can do directly applied coating. </li> <li> After coating, although finger touch to the surface it does not matter. </li> </ol> <br /> Use range:<br /> Automobile surface coating, surface coating motorcycle, bicycle paint surfaces, glass, wheel-rim, etc.<br /> <br /> * 397 anti-fungal expert Multi Type:<br /> Product features: <br /> <ol> <li> The effect to prevent variety of mold in the world: Effectively inhibit 223 kinds of fungal, 147 kinds of bacteria, 27 kinds of algae, up to 397 kinds of mold. </li> </ol> <p align="center"> <img src="images/detail/2%20in%20One%202-2.jpg" /> </p> 2. Not only sterilization but also long term suppression of the growth of mold: Just a little bit of nutrients and water, mold can instantly multiply, just constantly repeated sterilization will only become a breeding mildew resistant superbugs.<br /> 3. Not harm to human body: <ul> <li> Oral toxicity test, accidentally ingest "397 anti-fungal expert" compare with caffeine it just a small body' injury. </li> <li> It does not contain hormones, dioxin, a chemical control law (PRTR) in the specification 916 kinds of harmful substances. </li> <li> "397 anti-fungal expert" can effectively inhibit the presence of 57 kinds of general home fungus (cancer, allergies, fungal disease causes illness), to prevent ill effect. </li> </ul> <br /> Use range: <br /> Leather, carpets, clothing, curtains, purses, cloth, etc. permeable material. http://www.watertreatmentsystems.org/lotus-coating.html Lotus Coating http://www.watertreatmentsystems.org/productpic/ps_f0d21457502834.jpg http://www.watertreatmentsystems.org/lotus-coating.html Laser Welder <img src='productpic/ps_fwdi1457503337.jpg' /><br>Product name: YAG Laser Welder LW-1000<br /> Laser power generation:<br /> Once the input power: AC200V 150A 50/60Hz<br /> Once input: 45KVA<br /> Maximum load capacity: 200V 130A(When the Laser is maximum outpu)<br /> Standby load capacity: 200V 50A(when Lamp light up)<br /> Physical dimension: H1300 x W1470 x D810mm<br /> Weight: 530kg<br /> Generator Spec:<br /> Generating mode: Pulse<br /> Maximum average output power: 1000W<br /> Maximum pulse output: 5kW<br /> Pulse frequency: 20~200Hz<br /> Cooling water circulation device:<br /> Build in: Cycle Pump, water maker, water filter.<br /> Suitable cooling water: Pure Water<br /> Temperature: 20℃<br /> Cooling water source: Dedicated Chiller<br /> Gas adjustment circuit: Circuit switch, flow rate adjustment, after blow.<br /> Laser generator:<br /> Generating wavelength: 1.06um<br /> Generating mode: Pulse<br /> Output: 1000W<br /> User Lamp: Krypton Lamp x 2<br /> Laser Torch (For welding torch):<br /> Torch Size: Ø30 x 200mm<br /> Applicable Gas: N2, Ar,O2(Cutting process)<br /> Cooling method: Water cooling<br /> Fiber diameter: Ø 0.8<br /> Cable length: 8m<br /> Chiller unit RKED2200A-V-:<br /> Cooling capacity: 7.9/8.7kW 50Hz/60Hz(Liquid temperature 20℃)<br /> Once input: 200V<br /> Power capacity: 6.9kVA<br /> Environment temperature: 5℃~43℃<br /> Operating temperature: 5℃~43℃<br /> Physical dimension: 1440(H) x 960(W) x 730(D)<br /> Weight: 240kg<br /> <br /> Feature1: Without leaving groove on material.<br /> LW-1000 fulling output 1000W,&nbsp; therefore do not need a groove between both material, it can be welded.we can save time dig groove.<br /> <br /> Feature2: Highwelding speed.<br /> For SUS 3mm, welding speed can reach 300mm / min. Compare and TIG welding, the speed can be increas by 10%. Cause of Handy Type therefore minor part can be easy welding.<br /> <br /> Feature3: Filler rod is not required.<br /> Cause of non filler rod when welding, therefore cam be simple complete the welding process.<br /> <br /> Feature4: After welding, significantly reduced deformation.<br /> By a very small laser spot(Ø 0.8), only part of surface became heation during welding process. Compare with TIG, deformation can be reduce, which is advantage of this Laser.<br /> http://www.watertreatmentsystems.org/laser-welder.html Laser Welder http://www.watertreatmentsystems.org/productpic/ps_fwdi1457503337.jpg http://www.watertreatmentsystems.org/laser-welder.html Laser Welding Machine <img src='productpic/ps_f8xq1457503644.jpg' /><br>Product name: YAG Laser Welder LW-600<br /> Power Specifications:<br /> Power capacity: 26kVA<br /> Voltage: AC 200V 50/60Hz<br /> Frequency: 50/60Hz<br /> Generator Spec:<br /> Generating mode: Pulse<br /> The maximum average output power: 600W<br /> The maximum pulse output: 3kW<br /> Pulse frequency: 10~200Hz<br /> Laser Torch (For welding torch):<br /> Head diameter: Ø 32 x 160mm<br /> Cable length: 8m<br /> Machine connection port: 3/4 Ø 20mm Hoos connector<br /> Physical dimension: W600 x D1060 x H1080mm<br /> Machine weight: 370kg<br /> Cooling capacity: 12.2kw cooling water redevice.<br /> <br /> Feature1. Special Laser welding machine for thin stainless steel plate<br /> Applicable for thickness 0.1mm ~ 2mm workpiece. Simple to complete a welding work either SUS or steel material.<br /> <br /> Feature2.high Welding speed<br /> EX.SUS 1mm 840mm/min(Butt welding, Penetration on the back)<br /> SPC 1mm 625mm/min(90∘ fillet weld, Penetration on the back)<br /> Ti 1mm 820mm/min(Butt welding, Penetration on the back)<br /> <br /> Feature3. After welding, Significantly reduced deformation<br /> By a very small laser spot (Ø 0.8*), only part of surface became heating. It can be more quickly completely welding work compare with original welding method. Therefore can be greatly reduced&nbsp; deformation after welding.<br /> <br /> Feature4. With advantage of the sales price.<br /> Laser' transmitter, Rack, electrical circuit, the cooling circuit are produced by own(non-purchased), therefore the selling price is more favorable.<br /> http://www.watertreatmentsystems.org/laser-welding-machine.html Laser Welding Machine http://www.watertreatmentsystems.org/productpic/ps_f8xq1457503644.jpg http://www.watertreatmentsystems.org/laser-welding-machine.html Fiber Laser Welder <img src='productpic/ps_xi3x1461306193.jpg' /><br>Product name: Fiber Laser Welder 500/750W<br /> Power Specifications:<br /> Items: AFL-500<br /> Power capacity: 4KVA<br /> Voltage: AC 200V<br /> Frequency: 50/60Hz<br /> Generator Spec:<br /> Generating mode: CW, Pulse<br /> The maximum average output power: 500W<br /> Pulse frequency: 10~200Hz<br /> Laser Torch (For welding torch):<br /> Head diameter: Ø 32 x 170mm<br /> Fiber Cable length: 10m<br /> Physical dimension: W600 x D800 x H1600mm<br /> Machine weight: 240kg<br /> Cooling capacity: 1.2kw chiller<br /> <br /> Items: AFL-500<br /> Power capacity: 4KVA<br /> Voltage: AC 200V<br /> Frequency: 50/60Hz<br /> Generator Spec:<br /> Generating mode: CW,Pulse<br /> The maximum average output power: 750W<br /> Pulse frequency: 10~200Hz<br /> Laser Torch (For welding torch):<br /> Head diameter: Ø 32 x 170mm<br /> Fiber Cable length: 10m<br /> Physical dimension: W600 x D800 x H1600mm<br /> Machine weight: 240kg<br /> Cooling capacity: 1.8kw chiller<br /> <br /> Feature1. Special Laser welding machine for thin stainless steel plate<br /> AFL-500: Applicable for thickness 0.1mm ~ 3.0mm workpiece. Simple to complete a welding work either SUS or steel material or AL.<br /> AFL-750: Applicable for thickness 0.1mm ~ 4.0mm workpiece. Simple to complete a welding work either steel material or AL 0.5~2mm or Cu 0.5~1mm.<br /> <br /> Feature2. high Welding speed<br /> AFL-500:<br /> SUS 1mm 2000mm/min(Butt welding, Penetration on the back)<br /> SPC 1mm 1800mm/min(90∘ fillet weld, Penetration on the back)<br /> Al 1mm 1000mm/min(Butt welding, Penetration on the back)<br /> AFL-750:<br /> SUS 3mm 680mm/min(Butt welding, Penetration on the back)<br /> SPC 1mm 1800mm/min(90∘ fillet weld, Penetration on the back)<br /> Al 2mm 200mm/min, 1mm 1600mm/min(Butt welding, Penetration on the back)<br /> <br /> Feature3. After welding, Significantly reduced deformation<br /> By a very small laser spot (Ø 0.5), only part of surface became heating. It can be more quickly completely welding work compare with original welding method. Therefore can be greatly reduced deformation after welding.<br /> <br /> Feature4. Handy Type troch<br /> Handy touch with good operation, can produre different products. In addition by fitting a dedicated adapter can perform robot application.<br /> http://www.watertreatmentsystems.org/fiber-laser-welder.html Fiber Laser Welder http://www.watertreatmentsystems.org/productpic/ps_xi3x1461306193.jpg http://www.watertreatmentsystems.org/fiber-laser-welder.html Wire Feeder <img src='productpic/ps_jzmx1461306261.jpg' /><br>Product name: Wire Feeder W-201<br /> Product Specifications:<br /> Available wire diameter:<br /> It can be equipped with reel: inner diameter 50mm x outer diameter 300mm x width 100mm<br /> Supply Tube length: 3m<br /> Variable Speed: 0.5 ~ 54mm / sec<br /> Input Power: 100V 50 / 60Hz<br /> Dimensions: W220 X H360<br /> Product Weight: 12KG<br /> <br /> The product is recommended use with welding machines<br /> Laser welding machine<br /> TIG welding machine<br /> <br /> Feature1. Just replace the accessory device, it can be used on Tig'torch.<br /> Feature2. While stepping on the pedal, the wire will extended.<br /> Feature3. When a certain interval pedals, it can produce scale eye effect.<br /> Feature4. It can be linked with the welding machine.<br /> Feature5. Since in reel type, therefore can be continuous welding.<br /> <br /> Product name: Control Box<br /> With Inching.<br /> OperatingWith foot pedal.<br /> Can be linked with the welding machine (optional)<span id="__kindeditor_bookmark_start_0__"></span><br /> <img src="images/detail/W-201-1.jpg" /><br /> http://www.watertreatmentsystems.org/wire-feeder.html Wire Feeder http://www.watertreatmentsystems.org/productpic/ps_jzmx1461306261.jpg http://www.watertreatmentsystems.org/wire-feeder.html Weld Cleaning Machine <img src='productpic/ps_30w41456477822.jpg' /><br>Standard Type for Sheet Metal Work<br /> <br /> * PRODUCT FEATURES<br /> <img src="images/detail/MS-150-1.jpg" /><br /> <br /> * New method to clean weld mark. By using brush with our neutral electorlyte, if can easy &amp; completely remove the black mark near narrow, dead angle etc. after welding.<br /> <br /> * Use special brush, electorlyte,does not produce toxic gases, no epilation, after use rinse with water.<br /> <br /> * Our Neutral electrolyte contain special formulated that will not generte hexavalent chrome during electrolytic polishing process. It converted to triralent chromium that safe, no harm to humans and the environment.<br /> <br /> * PRODUCT SPECIFICATION<br /> &nbsp; Rated Input Power: Single Phase 100V/10A<br /> &nbsp; Rated Maximum output: 30A<br /> &nbsp; Outer Dimension: W180mm X L360mm X H220mm<br /> &nbsp; Weight: 8.2kg<br /> <br /> * APPLIACTION EXAMPLES<br /> <img src="images/detail/MS-150-2.jpg" /><br /> http://www.watertreatmentsystems.org/weld-cleaning-machine.html Weld Cleaning Machine http://www.watertreatmentsystems.org/productpic/ps_30w41456477822.jpg http://www.watertreatmentsystems.org/weld-cleaning-machine.html Weld Cleaning Machines <img src='productpic/ps_utmd1456477954.jpg' /><br>Multi-Function, High Power, Faster &amp; Finer Work<br /> <br /> * PRODUCT FEATURES<br /> <img src="images/detail/MS-340-1.jpg" /><br /> <br /> * New method to clean weld mark. By using brush with our neutral electorlyte, if can easy &amp; completely remove the black mark near narrow, dead angle etc. after welding.<br /> <br /> * Use special brush, electorlyte,does not produce toxic gases, no epilation, after use rinse with water.<br /> <br /> * After a few period of use, the electrode head may oxide, it have automatic cleaning function to maintain the scaler best performance.<br /> <br /> * Applicable materials : stainless steel, brass fittings, titanium alloys can also be processed.<br /> <br /> * Our Neutral electrolyte contain special formulated that will not generte hexavalent chrome during electrolytic polishing process. It converted to triralent chromium that safe, no harm to humans and the environment.<br /> <br /> * PRODUCT SPECIFICATION<br /> &nbsp; Rated Input Power: Single Phase 100V/15A<br /> &nbsp; Rated Maximum output: 38A<br /> &nbsp; Outer Dimension: W225mm X L265mm X H360mm<br /> &nbsp; Weight: 16kg<br /> <br /> * APPLIACTION EXAMPLES<br /> <img src="images/detail/MS-340-2.jpg" /><br /> http://www.watertreatmentsystems.org/weld-cleaning-machines.html Weld Cleaning Machines http://www.watertreatmentsystems.org/productpic/ps_utmd1456477954.jpg http://www.watertreatmentsystems.org/weld-cleaning-machines.html Weld Cleaning <img src='productpic/ps_7lwt1461813138.jpg' /><br>* PRODUCT FEATURES<br /> <ol> <li> The&nbsp;revolutionary&nbsp;base&nbsp;safety&nbsp;mechanism&nbsp;brand-new&nbsp;improvement&nbsp;promotes,&nbsp;theoperational&nbsp;safety&nbsp;is&nbsp;reliable. </li> <li> Voltage selection, suitable forsingle-phase 100V/200V. </li> <li> Life expectancy UP of a brush </li> <li> TSUYOTO scar marked decrease </li> <li> Processing speed UP! </li> </ol> <br /> * The feature of using Fiber cloth.<br /> <ol> <li> When fiber cloth was broken, causing a short circuit, and the scar was reduced. </li> <li> The process of using neutral electrolyte is speed UP! For stubborn weld mark, can be clean. </li> <li> For weak acid, processing speed moth UP! </li> <li> By using fiber cloth, hairline and mirror surface after process can reduce fog. </li> </ol> <br /> * The feature of using brush.<br /> <ol> <li> By use brush ,process time speed up &amp; effect is good. </li> <li> The life expectancy of the brush is substantial UP! </li> <li> Occurrence of a spark (spark) decreases. </li> <li> Smell waft in the air to reduce. </li> </ol> <br /> * The specification<br /> Input voltage: 100 V of single phase/200 V of single phase.<br /> Input current: 10A/100V / 5A/200V<br /> The number of input week waves: 50/60Hz<br /> The biggest output current: 40A<br /> Input code: 2m (100V with POTSUKINPURAGU)<br /> Size: W268mm * L384mm * H225mm<br /> Mass: 8.6kg http://www.watertreatmentsystems.org/weld-cleaning.html Weld Cleaning http://www.watertreatmentsystems.org/productpic/ps_7lwt1461813138.jpg http://www.watertreatmentsystems.org/weld-cleaning.html Best Acid Neutralizer <img src='productpic/ps_rsco1456478048.jpg' /><br>Various Line-Up of Neutralizer! Promis Safe &amp; Hight Quality Work.<br /> <br /> * Hairline Mirror/Flat AC Use Exclusive<br /> <ol> <li> Scale remove only For Mirror, Hairline, &amp; 2B(Light Burn) </li> <li> Better Corriosion resistance. </li> <li> Suitable for clean mirror, hairline, 2B stainless steel weld mark. After process the surface look like raw material. </li> <li> It will form a chromium carbide film, enhance acid resistance. </li> </ol> <br /> * OUTPUT SUPPLY: AC<br /> <br /> * FINISHING<br /> MIRROR: Excellent<br /> HAIRLINE: Excellent<br /> 2B: Good<br /> 1B: Good<br /> <br /> * PROCESSING SPEED: Good<br /> <br /> * AFTER TREATMENT: WIPE UP<br /> <br /> * COLOR: GREEN<br /> <br /> * After tretment is very simple. (Wipe up) Base matrial won't get hurt even with some leftover.<br /> http://www.watertreatmentsystems.org/best-acid-neutralizer.html Best Acid Neutralizer http://www.watertreatmentsystems.org/productpic/ps_rsco1456478048.jpg http://www.watertreatmentsystems.org/best-acid-neutralizer.html Acid Neutralizer Chemicals <img src='productpic/ps_j6ci1456478150.jpg' /><br>Various Line-Up of Neutralizer! Promis Safe &amp; Hight Quality Work.<br /> <br /> * Brush Elclusive No Toxic Gas!<br /> <ol> <li> Scale remove only For Mirror, Hairline, &amp; 2B(Light Burn) </li> <li> Stop toxic gas outbreak. </li> <li> Cleaning stainless steel weld mark, good for mirror, hairline, 2B surface. Surface finishing can be look like origin </li> <li> When using brush it must apply with a special electrolyte, this electrolyte can inhibit toxic gases. </li> </ol> <br /> * OUTPUT SUPPLY: AC<br /> <br /> * FINISHING<br /> MIRROR: Good<br /> HAIRLINE: Good<br /> 2B: Good<br /> 1B: Good<br /> <br /> * PROCESSING SPEED: Good<br /> <br /> * AFTER TREATMENT: WIPE UP<br /> <br /> * COLOR: TRANSPARENT<br /> <br /> * After tretment is very simple. (Wipe up) Base matrial won't get hurt even with some leftover.<br /> http://www.watertreatmentsystems.org/acid-neutralizer-chemicals.html Acid Neutralizer Chemicals http://www.watertreatmentsystems.org/productpic/ps_j6ci1456478150.jpg http://www.watertreatmentsystems.org/acid-neutralizer-chemicals.html Acid Neutralizer <img src='productpic/ps_tbgb1456478226.jpg' /><br>Various Line-Up of Neutralizer! Promis Safe &amp; Hight Quality Work.<br /> <br /> * Mirror &amp; Flat(Normal Type)<br /> <ol> <li> For All-Purpose. </li> <li> Especially Good for 1B. </li> <li> Multi-functional electrolyte. Very easy to use process. </li> <li> It can clean back side of 1B stainless steel weld mark. </li> </ol> <br /> * OUTPUT SUPPLY: AC-DC<br /> <br /> * FINISHING<br /> MIRROR: Good<br /> HAIRLINE: Good<br /> 2B: Excellent<br /> 1B: Excellent<br /> <br /> * PROCESSING SPEED: Excellent<br /> <br /> * AFTER TREATMENT: WATER WASH<br /> <br /> * COLOR: YELLOW<br /> <br /> * After tretment is very simple. (Wipe up) Base matrial won't get hurt even with some leftover.<br /> http://www.watertreatmentsystems.org/acid-neutralizer.html Acid Neutralizer http://www.watertreatmentsystems.org/productpic/ps_tbgb1456478226.jpg http://www.watertreatmentsystems.org/acid-neutralizer.html Acid Neutraliser <img src='productpic/ps_6adz1456478325.jpg' /><br>Various Line-Up of Neutralizer! Promis Safe &amp; Hight Quality Work.<br /> <br /> * Mirror(Strong Type)<br /> <ol> <li> Shiny &amp; Speedy Work </li> <li> 1B </li> <li> Suitable for clean stainless steel mirror surface(strong type). </li> <li> Surface finishing&amp; polishing is rate good. </li> <li> It can clean back side of 1B stainless steel weld mark. </li> </ol> <br /> * OUTPUT SUPPLY: AC-DC<br /> <br /> * FINISHING<br /> MIRROR: Excellent<br /> HAIRLINE: Excellent<br /> 2B: Good<br /> 1B: Good<br /> <br /> * PROCESSING SPEED: Good<br /> <br /> * AFTER TREATMENT: WIPE UP<br /> <br /> * COLOR: PINK<br /> <br /> * After tretment is very simple. (Wipe up) Base matrial won't get hurt even with some leftover.<br /> http://www.watertreatmentsystems.org/acid-neutraliser.html Acid Neutraliser http://www.watertreatmentsystems.org/productpic/ps_6adz1456478325.jpg http://www.watertreatmentsystems.org/acid-neutraliser.html Chemical Neutralizer <img src='productpic/ps_nza1456478414.jpg' /><br>Various Line-Up of Neutralizer! Promis Safe &amp; Hight Quality Work.<br /> <br /> * Multi-wavy Exclusive 2B, 1B.<br /> <ol> <li> Good for Mirror Hairline &amp; 2B. </li> <li> Special electrolyte for mutli-wave model </li> <li> It canbe use for clean mirror, hairline, 2B stainless steel weld mark </li> <li> Most suitable for cleaning back side of 2B stainless steel welding mark. </li> </ol> <br /> * OUTPUT SUPPLY: AC<br /> <br /> * FINISHING<br /> MIRROR: Good<br /> HAIRLINE: Good<br /> 2B: Excellent<br /> 1B: Excellent<br /> <br /> * PROCESSING SPEED: Good<br /> <br /> * AFTER TREATMENT: WIPE UP<br /> <br /> * COLOR: LIGHT BLUE<br /> <br /> * After tretment is very simple. (Wipe up) Base matrial won't get hurt even with some leftover.<br /> http://www.watertreatmentsystems.org/chemical-neutralizer.html Chemical Neutralizer http://www.watertreatmentsystems.org/productpic/ps_nza1456478414.jpg http://www.watertreatmentsystems.org/chemical-neutralizer.html Magnetic Gear <img src='productpic/ps_a0ek1455853144.jpg' /><br>The highly efficient type which thought the smooth transfer without cogging.<br /> <br /> Model: FD35, OD=Ø35, ID=Ø29, Heght=22<br /> Model: FD26, OD=Ø26, ID=Ø20, Heght=14<br /> Model: FD22, OD=Ø22, ID=Ø17, Heght=12<br /> Model: FD16, OD=Ø16, ID=Ø12, Heght=8<br /> <br /> * Processing is not needed for an attachment shaft but it can attach simply<br /> * With a stop screw with Hex.<br /> * Aluminum[Anti-corrosin].<br /> * Special size is also contracts.<br /> <br /> * Use classifiaction<br /> <img src="images/detail/FD_1.jpg" /><br /> <br /> Non-Contact Drive Transmission can apply in cross &amp; parallel type with Gap 0.5mm.<br /> Operating temperature: Standard 60 &amp; heat resistance 150. Use environment: Atmoshere &amp; vacuum<br /> <br /> * Heat resistance type torque is downed about 24% as compared with a standard type.<br /> Model: FD35, Corss type: 2.50kgf‧cm, Parallel tyep: 5.70kgf‧cm<br /> Model: FD26, Corss type: 0.70kgf‧cm, Parallel tyep: 1.90kgf‧cm<br /> Model: FD22, Corss type: 0.51kgf‧cm, Parallel tyep: 1.08kgf‧cm<br /> Model: FD16, Corss type: 0.14kgf‧cm, Parallel tyep: 0.33kgf‧cm<br /> <br /> * The followwing form also standardized the high torque tyep.<br /> Model: FD35(S), Corss type: 3.95kgf‧cm, Parallel tyep: 6.10kgf‧cm<br /> Model: FD26(S), Corss type: 1.45kgf‧cm, Parallel tyep: 2.20kgf‧cm<br /> Model: FD22(S), Corss type: 0.80kgf‧cm.<br /> <br /> * As for FD35(S) type, we have the left tosion tyep<br /> <br /> * Product description coding principles<br /> <img src="images/detail/FD_2.jpg" /> http://www.watertreatmentsystems.org/magnetic-gear.html Magnetic Gear http://www.watertreatmentsystems.org/productpic/ps_a0ek1455853144.jpg http://www.watertreatmentsystems.org/magnetic-gear.html Mechanical Gears <img src='productpic/ps_f23m1455853423.jpg' /><br>The highly efficient type which thought the smooth transfer without cogging.<br /> <br /> Model: FD35, ØD1=35,ØD2=29, ØA=Ø15, ØB=32, H=34.0, C=21, M=M4, e=5<br /> Model: FD35, ØD1=35,ØD2=29, ØA=Ø12, ØB=32, H=34.0, C=21, M=M4, e=5<br /> Model: FD26, ØD1=26,ØD2=20, ØA=Ø12, ØB=11, H=25.5, C=17, M=M3, e=5<br /> Model: FD26, ØD1=26,ØD2=20, ØA=Ø15, ØB=11, H=25.5, C=17, M=M3, e=5<br /> Model: FD22, ØD1=22,ØD2=17, ØA=Ø10, ØB=18, H=23.5, C=16, M=M3, e=5<br /> Model: FD22, ØD1=22,ØD2=17, ØA=Ø12, ØB=18, H=23.5, C=16, M=M3, e=5<br /> Model: FD16, ØD1=16,ØD2=12, ØA=Ø6, ØB=13, H=19.5, C=14, M=M3, e=5<br /> Model: FD16, ØD1=16,ØD2=12, ØA=Ø8, ØB=13, H=19.5, C=14, M=M3, e=5<br /> <br /> * Processing is not needed for an attachment shaft but it can attach simply.<br /> * With a stop screw with Hex.<br /> * Aluminum[Anti-corrosin].<br /> * Special size is also contracts.<br /> <br /> *Use classifiaction<br /> <img src="images/detail/FD%20hold_1.jpg" /><br /> <br /> Non-Contact Drive Transmission can apply in cross&nbsp; &amp; parallel type with Gap 0.5mm<br /> Operating temperature: Standard 60 &amp; heat resistance 150. Use environment: Atmoshere &amp; vacuum<br /> <br /> * Heat resistance type torque is downed about 24% as compared with a standard type.<br /> Model: FD35, Corss type: 2.50kgf‧cm, Parallel tyep: 5.70kgf‧cm<br /> Model: FD26, Corss type: 0.70kgf‧cm, Parallel tyep: 1.90kgf‧cm<br /> Model: FD22, Corss type: 0.51kgf‧cm, Parallel tyep: 1.08kgf‧cm<br /> Model: FD16, Corss type: 0.14kgf‧cm, Parallel tyep: 0.33kgf‧cm<br /> <br /> * The followwing form also standardized the high torque tyep.<br /> Model: FD35(S), Corss type: 3.95kgf‧cm, Parallel tyep: 6.10kgf‧cm<br /> Model: FD26(S), Corss type: 1.45kgf‧cm, Parallel tyep: 2.20kgf‧cm<br /> Model: FD22(S), Corss type: 0.80kgf‧cm.<br /> <br /> * As for FD35(S) type, we have the left tosion tyep<br /> <br /> * Product description coding principles<br /> <img src="images/detail/FD%20hold_2.jpg" /> http://www.watertreatmentsystems.org/mechanical-gears.html Mechanical Gears http://www.watertreatmentsystems.org/productpic/ps_f23m1455853423.jpg http://www.watertreatmentsystems.org/mechanical-gears.html Power Transmission Gears <img src='productpic/ps_kcxo1455853571.jpg' /><br>The atmospheres use type which thought cost performance and torque as important.<br /> The surprising low price was attained by our technical power and a user s needs.<br /> Please check this wonderful prodcut.<br /> <br /> Model: FB45, ØDØ=Ø45, ØA=20, All height(H)=45, height(h)=30, M=5<br /> Model: FB35, ØDØ=Ø35, ØA=20, All height(H)=33.5, height(h)=22, M=3<br /> Model: FB35, ØDØ=Ø35, ØA=15, All height(H)=33.5, height(h)=22, M=3<br /> Model: FB26, ØDØ=Ø26, ØA=15, All height(H)=25.5, height(h)=14, M=3<br /> Model: FB26, ØDØ=Ø26, ØA=12, All height(H)=25.5, height(h)=14, M=3<br /> <br /> * Transfer torque Gap: T=0.5mm Reference Value<br /> Model: FB45, Corss type: 8.20kgf‧cm.<br /> Model: FB35, Corss type: 2.25kgf‧cm, Parallel tyep: 5.25kgf‧cm<br /> Model: FB26, Corss type: 1.00kgf‧cm, Parallel tyep: 1.70kgf‧cm<br /> <br /> * As for FB45 &amp; FB35 type, we have the left torsion type.<br /> <br /> * Product description coding principles<br /> <br /> <img src="images/detail/FB_1.jpg" /> http://www.watertreatmentsystems.org/power-transmission-gears.html Power Transmission Gears http://www.watertreatmentsystems.org/productpic/ps_kcxo1455853571.jpg http://www.watertreatmentsystems.org/power-transmission-gears.html Bevel Gear <img src='productpic/ps_ozcm1455854054.jpg' /><br>Specification:<br /> Magent material: NdFeB Sintered Maget<br /> Holder material: Al(A5056)<br /> Magent surface treatment: Ni coating<br /> Heat temperature: 60℃<br /> <br /> Transfer torque<br /> Type: FDS6635, Combination gap: 0.3mm, Transfer torque=9.3kfg.cm<br /> Type: FDS6635, Combination gap: 0.5mm, Transfer torque=8.5kfg.cm<br /> Type: FDS6635, Combination gap: 0.7mm, Transfer torque=7.9kfg.cm<br /> Type: FDS6635, Combination gap: 1mm, Transfer torque=7.1kfg.cm<br /> Type: FDS4035, Combination gap: 0.3mm, Transfer torque=3.8kfg.cm<br /> Type: FDS4035, Combination gap: 0.5mm, Transfer torque=3.5kfg.cm<br /> Type: FDS4035, Combination gap: 0.7mm, Transfer torque=3.1kfg.cm<br /> Type: FDS4035, Combination gap: 1mm, Transfer torque=2.7kfg.cm<br /> Type: FDS3126, Combination gap: 0.3mm, Transfer torque=2.2kfg.cm<br /> Type: FDS3126, Combination gap: 0.5mm, Transfer torque=2kfg.cm<br /> Type: FDS3126, Combination gap: 0.7mm, Transfer torque=1.8kfg.cm<br /> Type: FDS3126, Combination gap: 1mm, Transfer torque=1.6kfg.cm<br /> Type: FDS3116, Combination gap: 0.3mm, Transfer torque=0.79kfg.cm<br /> Type: FDS3116, Combination gap: 0.5mm, Transfer torque=0.71kfg.cm<br /> Type: FDS3116, Combination gap: 0.7mm, Transfer torque=0.64kfg.cm<br /> Type: FDS3116, Combination gap: 1mm, Transfer torque=0.53kfg.cm<br /> <br /> Size Description: (mm)<br /> Type: FDS6635, Size description: ØD1=66, ØD2=35, H1=15, H2=34, Ød1=66, Ød2=32,<br /> &nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp;&nbsp; h1=5, h2=22, ØA=12 15, ØB=10 12 15,<br /> &nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp;&nbsp; L1 Fixing screws=M5, L2 Fixing screws=M4<br /> Type: FDS4035, Size description: ØD1=40, ØD2=35, H1=15, H2=34, Ød1=30, Ød2=32,<br /> &nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; h1=5, h2=22, ØA=10 12 15 , ØB=10 12 15,<br /> &nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; &nbsp; L1 Fixing screws=M4, L2 Fixing screws=M4<br /> Type: FDS3126, Size description: ØD1=31, ØD2=26, H1=15, H2=25.5, Ød1=28, Ød2=22,<br /> &nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp;&nbsp; h1=5, h2=14, ØA=8 10 12, ØB=10 12 15,<br /> &nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp;&nbsp;&nbsp; L1 Fixing screws=M4, L2 Fixing screws=M3<br /> Type: FDS3116, Size description: ØD1=31, ØD2=16, H1=15, H2=16, Ød1=28, Ød2=15,<br /> &nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp;&nbsp; &nbsp; h1=5, h2=8, ØA=8 10 12, ØB=6 8,<br /> &nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; L1 Fixing screws=M4, L2 Fixing screws=M3<br /> <br /> * Product description coding principles<br /> <img src="images/detail/FDS-HIGH%20BEVEL_1.jpg" /><br /> <br /> Model: FB45, ØDØ=Ø45, ØA=20, All height(H)=45, height(h)=30, M=5<br /> Model: FB35, ØDØ=Ø35, ØA=20, All height(H)=33.5, height(h)=22, M=3<br /> Model: FB35, ØDØ=Ø35, ØA=15, All height(H)=33.5, height(h)=22, M=3<br /> Model: FB26, ØDØ=Ø26, ØA=15, All height(H)=25.5, height(h)=14, M=3<br /> Model: FB26, ØDØ=Ø26, ØA=12, All height(H)=25.5, height(h)=14, M=3<br /> <br /> * Transfer torque Gap:T=0.5mm Reference Value<br /> Model: FB45, Corss type: 8.20kgf‧cm<br /> Model: FB35, Corss type: 2.25kgf‧cm, Parallel tyep: 5.25kgf‧cm<br /> Model: FB26, Corss type: 1.00kgf‧cm, Parallel tyep: 1.70kgf‧cm<br /> <br /> * As for FB45 &amp; FB35 type, we have the left torsion type.<br /> <br /> * Product description coding principles<br /> <img src="images/detail/FDS-HIGH%20BEVEL_2.jpg" /><br /> http://www.watertreatmentsystems.org/bevel-gear.html Bevel Gear http://www.watertreatmentsystems.org/productpic/ps_ozcm1455854054.jpg http://www.watertreatmentsystems.org/bevel-gear.html Bevel Gear Set <img src='productpic/ps_ny41455854398.jpg' /><br>Specification:<br /> Magent material: NdFeB Bonded Maget<br /> Holder material: Al(A5056)<br /> Magent surface treatment: resin<br /> Heat temperature: 60℃<br /> <br /> Transfer torque<br /> Type: FBS6635, Combination gap: 0.3mm, Transfer torque=6.3kfg.cm<br /> Type: FBS6635, Combination gap: 0.5mm, Transfer torque=5.7kfg.cm<br /> Type: FBS6635, Combination gap: 0.7mm, Transfer torque=5.3kfg.cm<br /> Type: FBS6635, Combination gap: 1mm, Transfer torque=4.8kfg.cm<br /> Type: FBS4035, Combination gap: 0.3mm, Transfer torque=2.2kfg.cm<br /> Type: FBS4035, Combination gap: 0.5mm, Transfer torque=2kfg.cm<br /> Type: FBS4035, Combination gap: 0.7mm, Transfer torque=1.8kfg.cm<br /> Type: FBS4035, Combination gap: 1mm, Transfer torque=1.5kfg.cm<br /> Type: FBS3126, Combination gap: 0.3mm, Transfer torque=0.8kfg.cm<br /> Type: FBS3126, Combination gap: 0.5mm, Transfer torque=0.7.cm<br /> Type: FBS3126, Combination gap: 0.7mm, Transfer torque=0.66kfg.cm<br /> Type: FBS3126, Combination gap: 1mm, Transfer torque=0.6kfg.cm<br /> Type: FBS3116, Combination gap: 0.3mm, Transfer torque=0.35kfg.cm<br /> Type: FBS3116, Combination gap: 0.5mm, Transfer torque=0.3kfg.cm<br /> Type: FBS3116, Combination gap: 0.7mm, Transfer torque=0.26kfg.cm<br /> Type: FBS3116, Combination gap: 1mm, Transfer torque=0.2kfg.cm<br /> <br /> Size Description: (mm)<br /> Type: FDS6635, Size description: ØD1=66, ØD2=35, H1=15, H2=34, Ød1=66, Ød2=32,<br /> &nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp;&nbsp; h1=5, h2=22, ØA=12 15, ØB=10 12 15,<br /> &nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp;&nbsp; L1 Fixing screws=M5, L2 Fixing screws=M4<br /> Type: FBS4035, Size description: ØD1=40, ØD2=35, H1=15, H2=20, Ød1=30, Ød2=30,<br /> &nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; h1=5, h2=10, ØA=10 12 15, ØB=10 12 15,<br /> &nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp;&nbsp; &nbsp; L1 Fixing screws=M4, L2 Fixing screws=M4<br /> Type: FBS3126, Size description: ØD1=31, ØD2=26, H1=15, H2=18, Ød1=28, Ød2=25,<br /> &nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; h1=5, h2=8, ØA=8 10 12, ØB=10 12 15,<br /> &nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; L1 Fixing screws=M4, L2 Fixing screws=M4<br /> Type: FBS3116, Size description: ØD1=31, ØD2=16, H1=15, H2=16, Ød1=16, Ød2=15,<br /> &nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp;&nbsp; &nbsp; h1=5, h2=8, ØA=8 10 12, ØB=6 8,<br /> &nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp;&nbsp; &nbsp; L1 Fixing screws=M4, L2 Fixing screws=M3<br /> &nbsp;<br /> * Product description coding principles<br /> <img src="images/detail/FBS-ECO%20BEVEL_1.jpg" /><br /> <br /> Model: FB45, ØDØ=Ø45, ØA=20, All height(H)=45, height(h)=30, M=5<br /> Model: FB35, ØDØ=Ø35, ØA=20, All height(H)=33.5, height(h)=22, M=3<br /> Model: FB35, ØDØ=Ø35, ØA=15, All height(H)=33.5, height(h)=22, M=3<br /> Model: FB26, ØDØ=Ø26, ØA=15, All height(H)=25.5, height(h)=14, M=3<br /> Model: FB26, ØDØ=Ø26, ØA=12, All height(H)=25.5, height(h)=14, M=3<br /> <br /> * Transfer torque Gap:T=0.5mm Reference Value<br /> Model: FB45, Corss type: 8.20kgf‧cm<br /> Model: FB35, Corss type: 2.25kgf‧cm, Parallel tyep: 5.25kgf‧cm<br /> Model: FB26, Corss type: 1.00kgf‧cm, Parallel tyep: 1.70kgf‧cm<br /> <br /> * As for FB45 &amp; FB35 type, we have the left torsion type.<br /> <br /> * Product description coding principles<br /> <img src="images/detail/FBS-ECO%20BEVEL_2.jpg" /> http://www.watertreatmentsystems.org/bevel-gear-set.html Bevel Gear Set http://www.watertreatmentsystems.org/productpic/ps_ny41455854398.jpg http://www.watertreatmentsystems.org/bevel-gear-set.html High Torque Coupling <img src='productpic/ps_0f2i1455854588.jpg' /><br>Specification:<br /> Magent material: NdFeB Sintered Maget<br /> Holder material: Al(A5056)<br /> Magent surface treatment: Ni coating<br /> Heat temperature: 60℃<br /> <br /> Transfer torque<br /> Type: FDS66W, Combination gap: 1mm, Transfer torque=56kfg.cm<br /> Type: FDS66W, Combination gap: 2mm, Transfer torque=44kfg.cm<br /> Type: FDS66W, Combination gap: 3mm, Transfer torque=36kfg.cm<br /> Type: FDS66W, Combination gap: 4mm, Transfer torque=24kfg.cm<br /> Type: FDS66W, Combination gap: 5mm, Transfer torque=18kfg.cm<br /> Type: FDS40W, Combination gap: 1mm, Transfer torque=16kfg.cm<br /> Type: FDS40W, Combination gap: 2mm, Transfer torque=11kfg.cm<br /> Type: FDS40W, Combination gap: 3mm, Transfer torque=5.6kfg.cm<br /> Type: FDS40W, Combination gap: 4mm, Transfer torque=4.2kfg.cm<br /> Type: FDS40W, Combination gap: 5mm, Transfer torque=3kfg.cm<br /> Type: FDS31W, Combination gap: 1mm, Transfer torque=6.9kfg.cm<br /> Type: FDS31W, Combination gap: 2mm, Transfer torque=4.2kfg.cm<br /> Type: FDS31W, Combination gap: 3mm, Transfer torque=2.3kfg.cm<br /> Type: FDS31W, Combination gap: 4mm, Transfer torque=1.1kfg.cm<br /> Type: FDS31W, Combination gap: 5mm, Transfer torque=0.6kfg.cm<br /> <br /> Size Description:(mm)<br /> Type: FDS66W, Size description: ØD=66, H=15, Ød=66, h=5, ØA=12 15, ØB=12 15,<br /> &nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; L Fixing screws=M5<br /> Type: FDS40W, Size description: ØD=40, H=15, Ød=40, h=5, ØA=12 15, ØB=12 15,<br /> &nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; L Fixing screws=M5<br /> Type: FDS31W, Size description: ØD=31, H=15, Ød=28, h=5, ØA=10 12, ØB=10 12,<br /> &nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; L Fixing screws=M4<br /> <br /> * Product description coding principles<br /> <img src="images/detail/FDS-HIGH%20COUPLING_1.jpg" /><br /> <br /> Model: FB45, ØDØ=Ø45, ØA=20, All height(H)=45, height(h)=30, M=5<br /> Model: FB35, ØDØ=Ø35, ØA=20, All height(H)=33.5, height(h)=22, M=3<br /> Model: FB35, ØDØ=Ø35, ØA=15, All height(H)=33.5, height(h)=22, M=3<br /> Model: FB26, ØDØ=Ø26, ØA=15, All height(H)=25.5, height(h)=14, M=3<br /> Model: FB26, ØDØ=Ø26, ØA=12, All height(H)=25.5, height(h)=14, M=3<br /> <br /> * Transfer torque Gap:T=0.5mm Reference Value<br /> Model: FB45, Corss type: 8.20kgf‧cm<br /> Model: FB35, Corss type: 2.25kgf‧cm, Parallel tyep: 5.25kgf‧cm<br /> Model: FB26, Corss type: 1.00kgf‧cm, Parallel tyep: 1.70kgf‧cm<br /> <br /> * As for FB45 &amp; FB35 type, we have the left torsion type.<br /> <br /> * Product description coding principles<br /> <img src="images/detail/FBS-ECO%20BEVEL_2.jpg" /> http://www.watertreatmentsystems.org/high-torque-coupling.html High Torque Coupling http://www.watertreatmentsystems.org/productpic/ps_0f2i1455854588.jpg http://www.watertreatmentsystems.org/high-torque-coupling.html Gear Coupling <img src='productpic/ps_ri9m1455854837.jpg' /><br>Specification:<br /> Magent material: NdFeB Bonded Maget<br /> Holder material: Al(A5056)<br /> Magent surface treatment: resin<br /> Heat temperature: 60℃<br /> <br /> Transfer torque<br /> Type: FBS66W, Combination gap: 1mm, Transfer torque=35kfg.cm<br /> Type: FBS66W, Combination gap: 2mm, Transfer torque=28kfg.cm<br /> Type: FBS66W, Combination gap: 3mm, Transfer torque=20kfg.cm<br /> Type: FBS66W, Combination gap: 4mm, Transfer torque=15kfg.cm<br /> Type: FBS66W, Combination gap: 5mm, Transfer torque=11kfg.cm<br /> Type: FBS40W, Combination gap: 1mm, Transfer torque=9.4kfg.cm<br /> Type: FBS40W, Combination gap: 2mm, Transfer torque=5kfg.cm<br /> Type: FBS40W, Combination gap: 3mm, Transfer torque=2.8kfg.cm<br /> Type: FBS40W, Combination gap: 4mm, Transfer torque=2kfg.cm<br /> Type: FBS40W, Combination gap: 5mm, Transfer torque=1.4kfg.cm<br /> Type: FBS31W, Combination gap: 1mm, Transfer torque=3.3kfg.cm<br /> Type: FBS31W, Combination gap: 2mm, Transfer torque=1.8kfg.cm<br /> Type: FBS31W, Combination gap: 3mm, Transfer torque=0.9kfg.cm<br /> Type: FBS31W, Combination gap: 4mm, Transfer torque=0.5kfg.cm<br /> Type: FBS31W, Combination gap: 5mm, Transfer torque=0.3kfg.cm<br /> <br /> Size Description: (mm)<br /> Type: FBS66W, Size description: ØD=66, H=15, Ød=66, h=5, ØA=12 15, ØB=12 15,<br /> &nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; L Fixing screws=M5<br /> Type: FBS40W, Size description: ØD=40, H=15, Ød=40, h=5, ØA=12 15, ØB=12 15,<br /> &nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp;&nbsp; L Fixing screws=M5<br /> Type: FBS31W, Size description: ØD=31, H=15, Ød=28, h=5, ØA=10 12, ØB=10 12,<br /> &nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp;&nbsp; L Fixing screws=M4<br /> <br /> * Product description coding principles<br /> <img src="images/detail/FDS-ECO%20COUPLING_1.jpg" /><br /> <br /> Model: FB45,ØDØ=Ø45, ØA=20, All height(H)=45, height(h)=30, M=5<br /> Model: FB35,ØDØ=Ø35, ØA=20, All height(H)=33.5, height(h)=22, M=3<br /> Model: FB35,ØDØ=Ø35, ØA=15, All height(H)=33.5, height(h)=22, M=3<br /> Model: FB26,ØDØ=Ø26, ØA=15, All height(H)=25.5, height(h)=14, M=3<br /> Model: FB26,ØDØ=Ø26, ØA=12, All height(H)=25.5, height(h)=14, M=3<br /> <br /> * Transfer torque Gap:T=0.5mm Reference Value<br /> Model: FB45, Corss type: 8.20kgf‧cm.<br /> Model: FB35, Corss type: 2.25kgf‧cm, Parallel tyep: 5.25kgf‧cm<br /> Model: FB26, Corss type: 1.00kgf‧cm, Parallel tyep: 1.70kgf‧cm<br /> <br /> * As for FB45 &amp; FB35 type, we have the left torsion type.<br /> <br /> * Product description coding principles<br /> <img src="images/detail/FDS-ECO%20COUPLING_2.jpg" /> http://www.watertreatmentsystems.org/gear-coupling.html Gear Coupling http://www.watertreatmentsystems.org/productpic/ps_ri9m1455854837.jpg http://www.watertreatmentsystems.org/gear-coupling.html Disk Coupling <img src='productpic/ps_he1v1455854840.jpg' /><br>High performance products, can be single purchase.<br /> <br /> Type:<br /> FS4035-Axx-Bxx<br /> FS3126-Axx-Bxx<br /> FS3116-Axx-Bxx<br /> <br /> PRODUCT FEATURES<br /> Low cost<br /> Miniaturization machine model design<br /> Simply adjust the gap<br /> Lightweight<br /> <br /> Specification:<br /> Magent material: NdFeB Bonded Maget<br /> Holder material: Al(A5056)<br /> Magent surface treatment: resin<br /> Holder surface treatment:White anodized<br /> Heat temperature: 60℃<br /> <br /> Transfer torque<br /> Type: FS4030-Axx-Bxx, Combination gap: 0.3mm, Transfer torque=2.2kfg.cm<br /> Type: FS4030-Axx-Bxx, Combination gap: 0.5mm, Transfer torque=2.0kfg.cm<br /> Type: FS4030-Axx-Bxx, Combination gap: 1.0mm, Transfer torque=1.5kfg.cm<br /> Type: FS3126-Axx-Bxx, Combination gap: 0.3mm, Transfer torque=0.8kfg.cm<br /> Type: FS3126-Axx-Bxx, Combination gap: 0.5mm, Transfer torque=0.7kfg.cm<br /> Type: FS3126-Axx-Bxx, Combination gap: 1.0mm, Transfer torque=0.6kfg.cm<br /> Type: FS3116-Axx-Bxx, Combination gap: 0.3mm, Transfer torque=0.35kfg.cm<br /> Type: FS3116-Axx-Bxx, Combination gap: 0.5mm, Transfer torque=0.3kfg.cm<br /> Type: FS3116-Axx-Bxx, Combination gap: 1.0mm, Transfer torque=0.2kfg.cm<br /> <br /> FS Disk &amp; Coupling Type<br /> High performance low cost product-coupling type<br /> <br /> Type:<br /> FS4040-Axx-Axx(Disk Type)<br /> FS3131-Axx-Axx(Coupling Type)<br /> <br /> PRODUCT FEATURES<br /> Low cost<br /> Non contact transmission can be drive in betwen partition(non magnetic)<br /> Simply adjust the gap<br /> Lightweight<br /> <br /> Specification:<br /> Magent material: NdFeB Bonded Maget<br /> Holder material: Al(A5056)<br /> Magent surface treatment: resin<br /> Holder surface treatment: White anodized<br /> Heat temperature: 60℃<br /> <br /> Transfer torque:<br /> Type: FS4040-Axx-Axx, Combination gap: 1mm, Transfer torque=9.4kfg.cm<br /> Type: FS4040-Axx-Axx, Combination gap: 2mm, Transfer torque=5.4kfg.cm<br /> Type: FS4040-Axx-Axx, Combination gap: 3mm, Transfer torque=2.8kfg.cm<br /> Type: FS4040-Axx-Axx, Combination gap: 4mm, Transfer torque=2.0kfg.cm<br /> Type: FS4040-Axx-Axx, Combination gap: 5mm, Transfer torque=1.4kfg.cm<br /> Type: FS3131-Axx-Axx, Combination gap: 0.5mm, Transfer torque=4.3kfg.cm<br /> Type: FS3131-Axx-Axx, Combination gap: 1.0mm, Transfer torque=3.3kfg.cm<br /> Type: FS3131-Axx-Axx, Combination gap: 1.5mm, Transfer torque=2.8kfg.cm<br /> Type: FS3131-Axx-Axx, Combination gap: 2.0mm, Transfer torque=1.8kfg.cm<br /> Type: FS3131-Axx-Axx, Combination gap: 2.5mm, Transfer torque=1.4kfg.cm http://www.watertreatmentsystems.org/disk-coupling.html Disk Coupling http://www.watertreatmentsystems.org/productpic/ps_he1v1455854840.jpg http://www.watertreatmentsystems.org/disk-coupling.html Micro Bubble Machine <img src='productpic/ps_f5rg1462515038.jpg' /><br>Product name: Fruit and Vegetable Micro Bubble Washer Machine<br /> <br /> Product Specifications:<br /> Model: UFB-DP-40<br /> Ultra.Fine bubble generetion particle size: Mean diameter: 104nm.<br /> Ultra.Fine bubble emissions: 3,81million/mL<br /> The amount: 20~40L/min<br /> OH radical production.<br /> <br /> Effect:<br /> <ol> <li> Apply micron-sized micro-nano bubble cleaning vegetables, which can be deep into the folds of leafy vegetables, clean out all minor impurities. Wash efficiency doubled, saving time and effort, increased by more than 50% efficiency. </li> <li> Submicron level bubbles can penetrate into the food structure, wash out the excess impurities, even fragile bird's nest, white fungus, Chinese traditional medicine can be easily cleaned. </li> <li> Add on ozone in ultra-fine bubbles, quickly and effectively remove 99% of harmful bacteria, decomposition of pesticide residues. </li> <li> Add the ozone sterilization in addition to, but also to remove the odor, flavor and increased food preservation. </li> <li> Can be assured a lot of cleaning, water and avoid wasting time. </li> </ol> <br /> Features:<br /> <ol> <li> Wash process: Optional automatic fine bubbles of water washing or stirring, two type of cleaning mode can simultaneously wash. </li> <li> Automatic mixing: the use of water jet holes formed reflux and then stirred for food, so that food can fully clean, it also save manpower; reflux can set the direction of time. </li> <li> Adjust accordance to fruits and vegetables special cleaning mode: superfine immersion cleaning, water spray cleaning, ultra-fine bubble stirring turns cleaning. </li> </ol> <br /> * Many kinds of fruits and vegetables can clean: mushrooms, celery, spinach, cabbage and other leaf vegetables and apples, Fan Xi, peppers, eggplants, cucumbers, strawberries and other fruits and vegetables. http://www.watertreatmentsystems.org/micro-bubble-machine.html Micro Bubble Machine http://www.watertreatmentsystems.org/productpic/ps_f5rg1462515038.jpg http://www.watertreatmentsystems.org/micro-bubble-machine.html Dog Washing Machine <img src='productpic/ps_kub1462515274.jpg' /><br>Product name: Autoumatie Dog Laundry<br /> <br /> Product Specifications:<br /> For puppy:<br /> Dog's body height: 20cm~40cm<br /> Dog's body length: 30cm~60cm<br /> Water tank capacity: 80L<br /> Machine weight: 40kg<br /> Power Specifications: 100V/1230W<br /> <br /> For size medium and large<br /> Dog's body height: 30cm~60cm<br /> Dog's body length: 50cm~90cm<br /> Water tank capacity:120L<br /> Machine weight: 60kg<br /> Power Specifications: 100V/1260W<br /> <br /> Autoumatie Dog Laundry use antibacterial material, only using tap water is generally configured via the inner machine produces nano bubble containing a hydroxyl group (OH group), in addition to cleaning, can reach sterilization, deodorizing antibacterial and other effects. Hydroxy can damage the internal structure of bacteria and other disease' microorganisms, a variety of pathogenic micro-organisms have a strong sterilizing effect for atopic dermatitis, other skin diseases&nbsp; and bactericidal effect.<br /> <br /> 5 Great Features<br /> <br /> Feature 1. Confidence can be seen.<br /> Autoumatie Dog Laundry transparent resin body structure, owners can clearly see the status of the dog's body wash and appease dog.<br /> <br /> Feature 2. All dogs can be applied.<br /> Based on the dog's body to adjust the size of the neck circumference and body height, use a soft sponge antibacterial water, wash water to prevent splashing to the outside pressure adjustment formula designed to gently cleanse the body and moderately stimulate the dog's skin.<br /> <br /> Feature 3. Antibacterial design.<br /> Autoumatie Dog Laundry antimicrobial resin material and the use of automatic temperature control device, as long as the water in the water tank, your dog can enjoy the comfort of warm water, the cleaning process as long as five minutes.<br /> <br /> Feature 4. Ensure peace of mind.<br /> Because of the dog's head is outside the Autoumatie Dog Laundry, so do not worry about the water will wash manager ears, nose, mouth into the dog's body. Therefore, do not worry will get infectious diseases.<br /> <br /> Feature 5. Easy to use.<br /> When using only the dogs into the hold, close the transparent cover press the start button, the dog will hold out to the end, easy to operate.<br /> http://www.watertreatmentsystems.org/dog-washing-machine.html Dog Washing Machine http://www.watertreatmentsystems.org/productpic/ps_kub1462515274.jpg http://www.watertreatmentsystems.org/dog-washing-machine.html Micro Bubble Generator <img src='productpic/ps_1qym1462515944.jpg' /><br>Product name: Cyclone system multi-bubble generating unit<br /> <br /> Product Specifications:<br /> Model: UFB-S-50<br /> Circuit system.Discharged water washing.<br /> Ultra.Fine bubble generetion particle size: Mean diameter: 104nm.<br /> Ultra.Fine bubble emissions: 3,81million/mL<br /> The amount: 20~50L/min<br /> OH radical production.<br /> <br /> Feature of product<br /> <ol> <li> Generate high density Bubble Micro to surround the object to be cleaned. </li> <li> Micro Bubble formation charged (negatively charged) state, selective adsorption the dirt (positive), will sucked on bubble surface. </li> <li> Micro Bubble stripping and cleaning(float separation out dirt), achieve cleaning and sterilizing effect. </li> <li> High density air bubble group to drive the mixing tank of the object, to promote the effect of washing. </li> <li> Micro Bubble bring water contact with an object, the bubble'pressure caused by the destruction of the impact of the dirt away. </li> </ol> <br /> The advantages of using Micro Bubble cleaning:<br /> <ol> <li> Compared with the traditional use of ozone water washing, as long as with micro bubble can be expected to play a nearly 10 times the particle removal rate, approximate the strong alkaline solution, sulfuric acid or ammonia, hydrogen, potion etc. effect. </li> <li> For all viruses, bacteria, fungi and other organic matter, with bactericidal, antibacterial and sterilization ability, destroy effect up to 99.9%. </li> <li> Greatly save the cost of cleaning! No need to use liquid medicine,detergent (or reduce the use of), thus more than the traditional washing machine can significantly save water charges. </li> <li> Because they do not use the detergent, dramatically reducing the irrigation frequency. Waste water can directly discharged into residential drainage system, so the water can also reduce the pollution of environment. </li> <li> The use of Bubble Micro cleaning process does not need to be heated, so it can reduce the heat energy and shorten the cleaning time. </li> </ol> http://www.watertreatmentsystems.org/micro-bubble-generator.html Micro Bubble Generator http://www.watertreatmentsystems.org/productpic/ps_1qym1462515944.jpg http://www.watertreatmentsystems.org/micro-bubble-generator.html Micro Bubble Nozzle <img src='productpic/ps_uzrg1463561730.jpg' /><br>Product name: Micro Bubble Nozzel<br /> <br /> Product Specifications:<br /> SNM-10, required pressure 0.07mpa, throughput: 10L / min<br /> SNM-20, required pressure 0.07mpa, throughput: 20L / min<br /> SNM-35, required pressure 0.07mpa, throughput: 35L / min<br /> SNM-50, required pressure 0.07mpa, throughput: 50L / min<br /> SNM-80, required pressure 0.07mpa, throughput: 80L / min<br /> SNM-100, required pressure 0.07mpa, throughput: 100L / min<br /> <br /> Featrue of Product<br /> Micro bubble is a very fine bubbles, can be formed by using water and air,&nbsp; through the micro bubble nozzle. Micro bubble' volume is smaller than the pores of the body, subtle depth to deep clean and has strong decontamination ability. Can change the gas component, such add on oxygen, ozone, nitrogen to increase cleaning function. In Japan has been widely used in various fields, such as agriculture, aquaculture, medical beauty and daily life.<br /> <br /> Agricultural use:<br /> <ol> <li> Through Micro Bubble, the molecules of water become smaller can increase the amount of dissolved oxygen in water. Root easily absorbed, prompting stems, leaves, flowers, fruit growing better. </li> <li> Through using Micro Bubble nozzle in hydroponic nutrient solution. Nutrient can recuperate to more finer elements,it can accelerating root uptake. </li> <li> The Micro Bubble with spray system, which can effectively help plants were bactericidal effect, to avoid pests and diseases. </li> </ol> <br /> Aquaculture Application<br /> <ol> <li> Carried out goldfish breeding experiments by using Mirco Bubble. After one month, Micro Bubble farmed goldfish grow into speed, the length of the body portion is about 2.5 times compare with general aquaculture, Part of abdomen width comparewith general water aquaculture about 10x. </li> <li> Oyster farming: use in Japan Micro Bubble farmed oysters can grow to 75mm in 1 year, while compare the use of general culture, only grow 50mm in 2 years. </li> <li> Micro Bubble treated the number of bacteria in seawater significantly reduce, the concentration of oxygen dissolved in seawater increase. </li> <li> Using the physical characteristics of the Bubble Micro, which has the characteristics of large quantity, surface area and long contact time, can greatly improve the problem of insufficient amount of dissolved oxygen in the pond. </li> </ol> http://www.watertreatmentsystems.org/micro-bubble-nozzle.html Micro Bubble Nozzle http://www.watertreatmentsystems.org/productpic/ps_uzrg1463561730.jpg http://www.watertreatmentsystems.org/micro-bubble-nozzle.html